Agilent 01610-90903 1610A Operators Guide Aug77 free download

File name 01610-90903 1610A Operators Guide Aug77.pdf

i OPERATORS GUIDE MODEL 1610A LOGIC STATE ANALYZER * " @COPYRIGHT HEWLETT-PACKARD COMPANY/COLORADO SPRINGS DIVISION 1977 1900 GARDEN OF THE GODS ROAD, COLORADO SPRINGS, COLORADO, U.S.A. -7 ,. -. ,.' ALL RIGHTS RESERVED L.' ;" `I /F' _ Manual Part Number 0161 o-90903 Microfiche Part Number 0161 o-90803 PRINTED: AUG 1977 SAFETY SUMMARY 7 t i The following general satefy precautions must be observed during all phases of operation, service, P and repair of this instrument. Failure to comply with these precautions or with specific warnings elsewhere in this manual vioiafes safety standards of design, manufacture, and intended use of the instrument. Hewlett-Packard Company assumes no i/ability for the customer's failure to comply -I with these requirements. r.J GROUND THE INSTRUMENT. To mrnrmrze shock hazard, the instrument chassis and cabinet must be connected to an electrical ground The tnstrument I S equipped with a three-conductor ac power cable. The power cable rnust etther be plugged Into an approved three-contact elEctrical outlet or used with a three-contact to two-contact adapter with the grounding wire (green) firmly connected to an electrical ground (safety groundi at the power outlet, The power jack and mating plug of the power cable meet lnternarronal Elt:lctrotechnrcal Commrssion (IEC) safety standards. -. DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE. I. Do not operate the instrument in the presence of flammable gases or fumes. Operation of any "I electrrcal instrument In such an environment constitutes a definite safety hazard. I;.I KEEP AWAY FROM LIVE CIRCUITS. `1 OperatIn!] personnel must not remove instrument covers. Component replacement and internal adjustments must be made by qualified maintenance personnel. Do not replace components with